Bowers & Wilkins CWM8.3 D - In-wall Speaker (Each) *B-Stock
Bowers & Wilkins CWM8.3D In-Wall Speaker *B-Stock
Experience unparalleled in-wall audio with the Bowers & Wilkins CWM8.3D In-Wall Speaker, designed to deliver reference-grade sound in a sleek, nearly invisible form. Ideal for premium home theaters and high-end audio installations, the CWM8.3D combines a 3-way driver configuration with cutting-edge acoustic technologies to reproduce stunning detail across the frequency spectrum.
Equipped with a Diamond Dome tweeter, a Continuum cone midrange driver, and dual Aerofoil bass drivers, this speaker offers exceptional performance that rivals high-end floorstanding speakers. The decoupled aluminum baffle, which can be rotated for vertical or horizontal installation, allows for flexible placement without compromising sound quality. Finished with subtle visual elements like a dark Continuum cone, the CWM8.3D blends seamlessly into any wall for a discreet, high-performance setup.
Specifications
- Drive Units:
- 1 x 25mm (1 in) Diamond Dome, Nautilus tube-loaded tweeter
- 1 x 130mm (5 in) Continuum midrange driver
- 2 x 180mm (7 in) Aerofoil bass drivers
- Design Features:
- 3-way in-wall speaker
- Rotatable aluminum baffle
- Decoupled design to minimize resonance
- Flowport for enhanced bass response
- Anti-resonance plug
- Frequency Range (-6dB): 30Hz – 35kHz
- Sensitivity: 89dB
- Nominal Impedance: 8Ω
- Recommended Amplifier Power: 200W
- Dimensions:
- Frame Height: 880mm (34.6 in)
- Frame Width: 254mm (10 in)
- Cut-out Height: 864mm (34 in)
- Cut-out Width: 238mm (9.4 in)
- Protrusion: 8mm (0.3 in)
- Net Weight: 10.9 kg
- Optional Accessory: Back Box BB CWM8.3
Key Features List
- Premium 3-Way Configuration: Incorporates a high-performance Diamond Dome tweeter, Continuum midrange driver, and twin Aerofoil bass drivers to deliver full-range, audiophile-grade sound from a discreet in-wall enclosure.
- Rotatable Aluminum Baffle: Easily rotate the baffle 90 degrees to install the speaker in either a vertical or horizontal orientation, enhancing layout flexibility for surround or LCR setups.
- Natural-Sounding Midrange: The Continuum cone driver offers a smooth, open, and precise midrange ideal for dialogue clarity and musical realism.
- Deep, Controlled Bass: Two 7-inch Aerofoil bass drivers deliver room-filling low-end frequencies without distortion, adding depth to music and movie soundtracks.
- Resonance-Free Audio: The decoupled mounting design and anti-resonance plug ensure minimal vibration and coloration, resulting in crystal-clear sound.
- Aesthetic Integration: The dark finish of the Continuum cone and shallow protrusion ensure the speaker disappears into the wall, maintaining the aesthetics of any room.
Q&A Section
Q: What type of installation does the CWM8.3D support?
A: The speaker supports in-wall installation with a rotatable aluminum baffle, allowing for both vertical and horizontal mounting.
Q: What is the benefit of the Diamond Dome tweeter?
A: The Diamond Dome tweeter offers ultra-precise high-frequency detail, making it ideal for high-resolution audio formats and immersive listening.
Q: Can the CWM8.3D be used as a center channel speaker?
A: Yes, its rotatable baffle makes it perfect for use as a center speaker in home theater systems.
Q: What kind of amplifier should I use?
A: A high-quality amplifier rated between 50W and 200W into 8Ω is recommended to fully leverage the speaker’s capabilities.
Q: Is the grille included, and is it paintable?
A: Yes, a magnetic grille is included and it is paintable to match your wall color for discreet integration.
Q: Is a back box necessary for installation?
A: It’s not required but recommended for optimal bass performance and acoustic isolation—the BB CWM8.3 is designed specifically for this model.
Q: Does the speaker support bi-amping?
A: No, the CWM8.3D does not support bi-amping; it is designed as a single-wire in-wall speaker system.
Q: What size cut-out is needed for installation?
A: The cut-out dimensions are 864mm (34 in) in height and 238mm (9.4 in) in width.
B&W CWM8.3D Manual
B&W CWM8.3D Info Sheet
B&W CWM8.3D Drawing
Original: $2,100.00
-65%$2,100.00
$735.00More Images
Bowers & Wilkins CWM8.3 D - In-wall Speaker (Each) *B-Stock
Bowers & Wilkins CWM8.3D In-Wall Speaker *B-Stock
Experience unparalleled in-wall audio with the Bowers & Wilkins CWM8.3D In-Wall Speaker, designed to deliver reference-grade sound in a sleek, nearly invisible form. Ideal for premium home theaters and high-end audio installations, the CWM8.3D combines a 3-way driver configuration with cutting-edge acoustic technologies to reproduce stunning detail across the frequency spectrum.
Equipped with a Diamond Dome tweeter, a Continuum cone midrange driver, and dual Aerofoil bass drivers, this speaker offers exceptional performance that rivals high-end floorstanding speakers. The decoupled aluminum baffle, which can be rotated for vertical or horizontal installation, allows for flexible placement without compromising sound quality. Finished with subtle visual elements like a dark Continuum cone, the CWM8.3D blends seamlessly into any wall for a discreet, high-performance setup.
Specifications
- Drive Units:
- 1 x 25mm (1 in) Diamond Dome, Nautilus tube-loaded tweeter
- 1 x 130mm (5 in) Continuum midrange driver
- 2 x 180mm (7 in) Aerofoil bass drivers
- Design Features:
- 3-way in-wall speaker
- Rotatable aluminum baffle
- Decoupled design to minimize resonance
- Flowport for enhanced bass response
- Anti-resonance plug
- Frequency Range (-6dB): 30Hz – 35kHz
- Sensitivity: 89dB
- Nominal Impedance: 8Ω
- Recommended Amplifier Power: 200W
- Dimensions:
- Frame Height: 880mm (34.6 in)
- Frame Width: 254mm (10 in)
- Cut-out Height: 864mm (34 in)
- Cut-out Width: 238mm (9.4 in)
- Protrusion: 8mm (0.3 in)
- Net Weight: 10.9 kg
- Optional Accessory: Back Box BB CWM8.3
Key Features List
- Premium 3-Way Configuration: Incorporates a high-performance Diamond Dome tweeter, Continuum midrange driver, and twin Aerofoil bass drivers to deliver full-range, audiophile-grade sound from a discreet in-wall enclosure.
- Rotatable Aluminum Baffle: Easily rotate the baffle 90 degrees to install the speaker in either a vertical or horizontal orientation, enhancing layout flexibility for surround or LCR setups.
- Natural-Sounding Midrange: The Continuum cone driver offers a smooth, open, and precise midrange ideal for dialogue clarity and musical realism.
- Deep, Controlled Bass: Two 7-inch Aerofoil bass drivers deliver room-filling low-end frequencies without distortion, adding depth to music and movie soundtracks.
- Resonance-Free Audio: The decoupled mounting design and anti-resonance plug ensure minimal vibration and coloration, resulting in crystal-clear sound.
- Aesthetic Integration: The dark finish of the Continuum cone and shallow protrusion ensure the speaker disappears into the wall, maintaining the aesthetics of any room.
Q&A Section
Q: What type of installation does the CWM8.3D support?
A: The speaker supports in-wall installation with a rotatable aluminum baffle, allowing for both vertical and horizontal mounting.
Q: What is the benefit of the Diamond Dome tweeter?
A: The Diamond Dome tweeter offers ultra-precise high-frequency detail, making it ideal for high-resolution audio formats and immersive listening.
Q: Can the CWM8.3D be used as a center channel speaker?
A: Yes, its rotatable baffle makes it perfect for use as a center speaker in home theater systems.
Q: What kind of amplifier should I use?
A: A high-quality amplifier rated between 50W and 200W into 8Ω is recommended to fully leverage the speaker’s capabilities.
Q: Is the grille included, and is it paintable?
A: Yes, a magnetic grille is included and it is paintable to match your wall color for discreet integration.
Q: Is a back box necessary for installation?
A: It’s not required but recommended for optimal bass performance and acoustic isolation—the BB CWM8.3 is designed specifically for this model.
Q: Does the speaker support bi-amping?
A: No, the CWM8.3D does not support bi-amping; it is designed as a single-wire in-wall speaker system.
Q: What size cut-out is needed for installation?
A: The cut-out dimensions are 864mm (34 in) in height and 238mm (9.4 in) in width.
B&W CWM8.3D Manual
B&W CWM8.3D Info Sheet
B&W CWM8.3D Drawing
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Bowers & Wilkins CWM8.3D In-Wall Speaker *B-Stock
Experience unparalleled in-wall audio with the Bowers & Wilkins CWM8.3D In-Wall Speaker, designed to deliver reference-grade sound in a sleek, nearly invisible form. Ideal for premium home theaters and high-end audio installations, the CWM8.3D combines a 3-way driver configuration with cutting-edge acoustic technologies to reproduce stunning detail across the frequency spectrum.
Equipped with a Diamond Dome tweeter, a Continuum cone midrange driver, and dual Aerofoil bass drivers, this speaker offers exceptional performance that rivals high-end floorstanding speakers. The decoupled aluminum baffle, which can be rotated for vertical or horizontal installation, allows for flexible placement without compromising sound quality. Finished with subtle visual elements like a dark Continuum cone, the CWM8.3D blends seamlessly into any wall for a discreet, high-performance setup.
Specifications
- Drive Units:
- 1 x 25mm (1 in) Diamond Dome, Nautilus tube-loaded tweeter
- 1 x 130mm (5 in) Continuum midrange driver
- 2 x 180mm (7 in) Aerofoil bass drivers
- Design Features:
- 3-way in-wall speaker
- Rotatable aluminum baffle
- Decoupled design to minimize resonance
- Flowport for enhanced bass response
- Anti-resonance plug
- Frequency Range (-6dB): 30Hz – 35kHz
- Sensitivity: 89dB
- Nominal Impedance: 8Ω
- Recommended Amplifier Power: 200W
- Dimensions:
- Frame Height: 880mm (34.6 in)
- Frame Width: 254mm (10 in)
- Cut-out Height: 864mm (34 in)
- Cut-out Width: 238mm (9.4 in)
- Protrusion: 8mm (0.3 in)
- Net Weight: 10.9 kg
- Optional Accessory: Back Box BB CWM8.3
Key Features List
- Premium 3-Way Configuration: Incorporates a high-performance Diamond Dome tweeter, Continuum midrange driver, and twin Aerofoil bass drivers to deliver full-range, audiophile-grade sound from a discreet in-wall enclosure.
- Rotatable Aluminum Baffle: Easily rotate the baffle 90 degrees to install the speaker in either a vertical or horizontal orientation, enhancing layout flexibility for surround or LCR setups.
- Natural-Sounding Midrange: The Continuum cone driver offers a smooth, open, and precise midrange ideal for dialogue clarity and musical realism.
- Deep, Controlled Bass: Two 7-inch Aerofoil bass drivers deliver room-filling low-end frequencies without distortion, adding depth to music and movie soundtracks.
- Resonance-Free Audio: The decoupled mounting design and anti-resonance plug ensure minimal vibration and coloration, resulting in crystal-clear sound.
- Aesthetic Integration: The dark finish of the Continuum cone and shallow protrusion ensure the speaker disappears into the wall, maintaining the aesthetics of any room.
Q&A Section
Q: What type of installation does the CWM8.3D support?
A: The speaker supports in-wall installation with a rotatable aluminum baffle, allowing for both vertical and horizontal mounting.
Q: What is the benefit of the Diamond Dome tweeter?
A: The Diamond Dome tweeter offers ultra-precise high-frequency detail, making it ideal for high-resolution audio formats and immersive listening.
Q: Can the CWM8.3D be used as a center channel speaker?
A: Yes, its rotatable baffle makes it perfect for use as a center speaker in home theater systems.
Q: What kind of amplifier should I use?
A: A high-quality amplifier rated between 50W and 200W into 8Ω is recommended to fully leverage the speaker’s capabilities.
Q: Is the grille included, and is it paintable?
A: Yes, a magnetic grille is included and it is paintable to match your wall color for discreet integration.
Q: Is a back box necessary for installation?
A: It’s not required but recommended for optimal bass performance and acoustic isolation—the BB CWM8.3 is designed specifically for this model.
Q: Does the speaker support bi-amping?
A: No, the CWM8.3D does not support bi-amping; it is designed as a single-wire in-wall speaker system.
Q: What size cut-out is needed for installation?
A: The cut-out dimensions are 864mm (34 in) in height and 238mm (9.4 in) in width.
B&W CWM8.3D Manual
B&W CWM8.3D Info Sheet
B&W CWM8.3D Drawing
