Rotel Michi P5 Series2 Stereo Preamp
Michi P5 Series 2 Stereo Preamplifier
The Michi P5 Series 2 Stereo Preamplifier is a flagship control center built for listeners who want reference-level detail, vanishingly low noise, and total system flexibility. At its heart are dual 8-channel ESS SABRE ES9028PRO DACs, configured in MONO mode with 8 DAC channels per side to pull out micro-detail, expand soundstage width, and keep the background exceptionally quiet. A meticulously engineered power supply with dual shielded toroidal transformers and 16 independent power supplies isolates critical circuits so complex music stays clean, layered, and effortless at any volume.
Connectivity is equally uncompromising: connect turntables via a high-performance MM/MC phono stage, run sources through balanced XLR and RCA analog inputs, and enjoy high-resolution digital playback through coax/optical, PC-USB, and Bluetooth with aptX HD and AAC. The P5 Series 2 also supports MQA/MQA Studio, is Roon Tested, includes a front headphone output, and offers serious integration tools like RS232, Ethernet, and 12V triggers - making it as installer-friendly as it is audiophile-focused.
The Michi P5 Series 2 is part of ListenUp's Rotel Premplifiers Collection.
What It's Good At:
- Ultra-resolving DAC performance with dual ESS SABRE ES9028PRO converters in MONO mode for expansive imaging and low noise
- Turntable-ready flexibility with built-in Moving Magnet and Moving Coil phono support
- True high-end connectivity including balanced XLR I/O, multiple analog inputs, and digital inputs for modern sources
- Hi-res computer audio via PC-USB with PCM up to 32-bit/384kHz, plus DSD/DoP and MQA support
- Wireless convenience without compromise using Bluetooth aptX HD + AAC for higher-quality streaming
- System integration and control with Ethernet, RS232, and 12V trigger support for custom installs
Michi P5 Series 2 Full Specifications:
- Total Harmonic Distortion (THD) (20Hzโ20kHz): < 0.002%
- Intermodulation Distortion (60 Hz : 7 kHz, 4:1): < 0.002%
- Input Sensitivity / Impedance โ Phono Input (MM): 2.5 mV / 47k ohms
- Input Sensitivity / Impedance โ Phono Input (MC): 250 uV / 100 ohms
- Input Sensitivity / Impedance โ Line Level Inputs (RCA): 160 mV / 47k ohms
- Input Sensitivity / Impedance โ Line Level Inputs (XLR): 250 mV / 100k ohms
- Input Overload โ Phono Input (MM): 199 mV
- Input Overload โ Phono Input (MC): 22 mV
- Input Overload โ Line Level Inputs (RCA): 12 V
- Input Overload โ Line Level Inputs (XLR): 12 V
- Output Level โ Line Level (RCA): 1 V / 470 ohms
- Output Level โ Line Level (XLR): 2 V / 100 ohms
- Frequency Response (Analog) โ Phono Input: 20 Hz โ 20 kHz (0 ยฑ 0.3 dB)
- Frequency Response (Analog) โ Line Level Inputs: 10 Hz โ 100 kHz (0 ยฑ 0.3 dB)
- Tone Controls โ Bass: ยฑ 10 dB at 100 Hz
- Tone Controls โ Treble: ยฑ 10 dB at 10 kHz
- Signal to Noise Ratio (IHF โAโ weighted) โ Phono Input: 80 dB
- Signal to Noise Ratio (IHF โAโ weighted) โ Line Level Inputs: 116 dB
- Channel Separation โ Phono Input: > 55 dB
- Channel Separation โ Line Level Inputs: > 85 dB
- Digital Section โ Frequency Response: 20 Hz โ 20 kHz (0 ยฑ 0.3 dB Max)
- Digital Section โ Signal to Noise Ratio (IHF โAโ weighted): 100 dB
- Digital Section โ Input Sensitivity/Impedance: 0 dBFs / 75 ohms
- Digital Section โ Digital Output: 0.75V, Peak to Peak
- Digital Section โ Load Impedance: 75 Ohms
- Digital Section โ Coaxial/Optical Digital Signals: SPDIF LPCM (up to 192kHz / 24 bit)
- Digital Section โ PC-USB (USB Audio Class 1.0): up to 96kHz / 24-bit
- Digital Section โ PC-USB (USB Audio Class 2.0): up to 384kHz / 32-bit (driver installation required)
- Digital Section โ DSD and DoP: Supported
- Digital Section โ MQA and MQA Studio: Supported
- Digital Section โ Roon Tested: Yes
- Power Requirements (Europe): 230 Volts, 50 Hz
- Power Requirements (USA): 120 Volts, 60 Hz
- Power Consumption: 40 watts
- Standby Power Consumption (Normal): < 0.5 watts
- Standby Power Consumption (Network Wakeup): < 2 watts
- BTU (4 ohms, 1/8 power): 87 BTU/h
- Dimensions (W x H x D): 485 x 150 x 452 mm (19" x 6" x 17 3/4")
- Front Panel Height: 132 mm / 5 1/4"
- Weight (net): 22.9 kg / 50.5 lb
- Finish: Black
- Connections: MM/MC phono input with ground; 3 pairs RCA line inputs (CD/Tuner/Aux); 2 pairs XLR inputs; 3 digital inputs (coax/optical sets); PC-USB; Bluetooth (AAC, aptX HD); 2 sets RCA preamp outputs; 2 pairs XLR outputs; line output; 2 mono sub outputs; digital output; front 6.3mm headphone output; rear USB power/update port; Ethernet; RS232; EXT REM IN; 12V trigger connections
- DAC Configuration: Dual 8-channel ESS SABRE ES9028PRO in MONO mode
Michi P5 Series 2 Q&A:
- What makes the Michi P5 Series 2 different from a typical preamp?
- It combines a reference-grade analog preamp with a flagship dual-DAC digital section, plus premium power isolation, to deliver exceptionally low noise and high resolution from both analog and digital sources.
- Does the P5 Series 2 work with turntables?
- Yes. It includes a built-in phono stage supporting both Moving Magnet (MM) and Moving Coil (MC) cartridges, plus a ground connection to help reduce hum.
- Can I connect balanced XLR sources and amplifiers?
- Yes. The P5 Series 2 offers two pairs of balanced XLR inputs and two pairs of balanced XLR outputs for fully balanced system builds.
- What digital sources can I connect?
- You can connect coaxial and optical digital sources (up to 24-bit/192kHz) and computers via PC-USB (up to 32-bit/384kHz in USB Audio Class 2.0 mode).
- Does it support Roon and MQA?
- Yes. It is Roon Tested and supports MQA/MQA Studio, with full capability available via PC-USB in USB Audio Class 2.0 mode.
- Can I stream music wirelessly to it?
- Yes. Bluetooth streaming is supported, including AAC and aptX HD for improved wireless audio quality.
- Does it have outputs for subwoofers?
- Yes. It provides two mono subwoofer outputs, making it easy to integrate one or two subs into a high-end 2-channel system.
- Is it suitable for custom installation and automation systems?
- Yes. Ethernet and RS232 connections are included for control system integration, along with 12V trigger connectivity for coordinated power control.
Michi P5 Series 2 Downloads:
Michi P5 Series 2 Manual
Michi P5 Series 2 Specifications Sheet
Michi P5 Series 2 Drawing
Original: $5,599.00
-65%$5,599.00
$1,959.65More Images
Rotel Michi P5 Series2 Stereo Preamp
Michi P5 Series 2 Stereo Preamplifier
The Michi P5 Series 2 Stereo Preamplifier is a flagship control center built for listeners who want reference-level detail, vanishingly low noise, and total system flexibility. At its heart are dual 8-channel ESS SABRE ES9028PRO DACs, configured in MONO mode with 8 DAC channels per side to pull out micro-detail, expand soundstage width, and keep the background exceptionally quiet. A meticulously engineered power supply with dual shielded toroidal transformers and 16 independent power supplies isolates critical circuits so complex music stays clean, layered, and effortless at any volume.
Connectivity is equally uncompromising: connect turntables via a high-performance MM/MC phono stage, run sources through balanced XLR and RCA analog inputs, and enjoy high-resolution digital playback through coax/optical, PC-USB, and Bluetooth with aptX HD and AAC. The P5 Series 2 also supports MQA/MQA Studio, is Roon Tested, includes a front headphone output, and offers serious integration tools like RS232, Ethernet, and 12V triggers - making it as installer-friendly as it is audiophile-focused.
The Michi P5 Series 2 is part of ListenUp's Rotel Premplifiers Collection.
What It's Good At:
- Ultra-resolving DAC performance with dual ESS SABRE ES9028PRO converters in MONO mode for expansive imaging and low noise
- Turntable-ready flexibility with built-in Moving Magnet and Moving Coil phono support
- True high-end connectivity including balanced XLR I/O, multiple analog inputs, and digital inputs for modern sources
- Hi-res computer audio via PC-USB with PCM up to 32-bit/384kHz, plus DSD/DoP and MQA support
- Wireless convenience without compromise using Bluetooth aptX HD + AAC for higher-quality streaming
- System integration and control with Ethernet, RS232, and 12V trigger support for custom installs
Michi P5 Series 2 Full Specifications:
- Total Harmonic Distortion (THD) (20Hzโ20kHz): < 0.002%
- Intermodulation Distortion (60 Hz : 7 kHz, 4:1): < 0.002%
- Input Sensitivity / Impedance โ Phono Input (MM): 2.5 mV / 47k ohms
- Input Sensitivity / Impedance โ Phono Input (MC): 250 uV / 100 ohms
- Input Sensitivity / Impedance โ Line Level Inputs (RCA): 160 mV / 47k ohms
- Input Sensitivity / Impedance โ Line Level Inputs (XLR): 250 mV / 100k ohms
- Input Overload โ Phono Input (MM): 199 mV
- Input Overload โ Phono Input (MC): 22 mV
- Input Overload โ Line Level Inputs (RCA): 12 V
- Input Overload โ Line Level Inputs (XLR): 12 V
- Output Level โ Line Level (RCA): 1 V / 470 ohms
- Output Level โ Line Level (XLR): 2 V / 100 ohms
- Frequency Response (Analog) โ Phono Input: 20 Hz โ 20 kHz (0 ยฑ 0.3 dB)
- Frequency Response (Analog) โ Line Level Inputs: 10 Hz โ 100 kHz (0 ยฑ 0.3 dB)
- Tone Controls โ Bass: ยฑ 10 dB at 100 Hz
- Tone Controls โ Treble: ยฑ 10 dB at 10 kHz
- Signal to Noise Ratio (IHF โAโ weighted) โ Phono Input: 80 dB
- Signal to Noise Ratio (IHF โAโ weighted) โ Line Level Inputs: 116 dB
- Channel Separation โ Phono Input: > 55 dB
- Channel Separation โ Line Level Inputs: > 85 dB
- Digital Section โ Frequency Response: 20 Hz โ 20 kHz (0 ยฑ 0.3 dB Max)
- Digital Section โ Signal to Noise Ratio (IHF โAโ weighted): 100 dB
- Digital Section โ Input Sensitivity/Impedance: 0 dBFs / 75 ohms
- Digital Section โ Digital Output: 0.75V, Peak to Peak
- Digital Section โ Load Impedance: 75 Ohms
- Digital Section โ Coaxial/Optical Digital Signals: SPDIF LPCM (up to 192kHz / 24 bit)
- Digital Section โ PC-USB (USB Audio Class 1.0): up to 96kHz / 24-bit
- Digital Section โ PC-USB (USB Audio Class 2.0): up to 384kHz / 32-bit (driver installation required)
- Digital Section โ DSD and DoP: Supported
- Digital Section โ MQA and MQA Studio: Supported
- Digital Section โ Roon Tested: Yes
- Power Requirements (Europe): 230 Volts, 50 Hz
- Power Requirements (USA): 120 Volts, 60 Hz
- Power Consumption: 40 watts
- Standby Power Consumption (Normal): < 0.5 watts
- Standby Power Consumption (Network Wakeup): < 2 watts
- BTU (4 ohms, 1/8 power): 87 BTU/h
- Dimensions (W x H x D): 485 x 150 x 452 mm (19" x 6" x 17 3/4")
- Front Panel Height: 132 mm / 5 1/4"
- Weight (net): 22.9 kg / 50.5 lb
- Finish: Black
- Connections: MM/MC phono input with ground; 3 pairs RCA line inputs (CD/Tuner/Aux); 2 pairs XLR inputs; 3 digital inputs (coax/optical sets); PC-USB; Bluetooth (AAC, aptX HD); 2 sets RCA preamp outputs; 2 pairs XLR outputs; line output; 2 mono sub outputs; digital output; front 6.3mm headphone output; rear USB power/update port; Ethernet; RS232; EXT REM IN; 12V trigger connections
- DAC Configuration: Dual 8-channel ESS SABRE ES9028PRO in MONO mode
Michi P5 Series 2 Q&A:
- What makes the Michi P5 Series 2 different from a typical preamp?
- It combines a reference-grade analog preamp with a flagship dual-DAC digital section, plus premium power isolation, to deliver exceptionally low noise and high resolution from both analog and digital sources.
- Does the P5 Series 2 work with turntables?
- Yes. It includes a built-in phono stage supporting both Moving Magnet (MM) and Moving Coil (MC) cartridges, plus a ground connection to help reduce hum.
- Can I connect balanced XLR sources and amplifiers?
- Yes. The P5 Series 2 offers two pairs of balanced XLR inputs and two pairs of balanced XLR outputs for fully balanced system builds.
- What digital sources can I connect?
- You can connect coaxial and optical digital sources (up to 24-bit/192kHz) and computers via PC-USB (up to 32-bit/384kHz in USB Audio Class 2.0 mode).
- Does it support Roon and MQA?
- Yes. It is Roon Tested and supports MQA/MQA Studio, with full capability available via PC-USB in USB Audio Class 2.0 mode.
- Can I stream music wirelessly to it?
- Yes. Bluetooth streaming is supported, including AAC and aptX HD for improved wireless audio quality.
- Does it have outputs for subwoofers?
- Yes. It provides two mono subwoofer outputs, making it easy to integrate one or two subs into a high-end 2-channel system.
- Is it suitable for custom installation and automation systems?
- Yes. Ethernet and RS232 connections are included for control system integration, along with 12V trigger connectivity for coordinated power control.
Michi P5 Series 2 Downloads:
Michi P5 Series 2 Manual
Michi P5 Series 2 Specifications Sheet
Michi P5 Series 2 Drawing
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Michi P5 Series 2 Stereo Preamplifier
The Michi P5 Series 2 Stereo Preamplifier is a flagship control center built for listeners who want reference-level detail, vanishingly low noise, and total system flexibility. At its heart are dual 8-channel ESS SABRE ES9028PRO DACs, configured in MONO mode with 8 DAC channels per side to pull out micro-detail, expand soundstage width, and keep the background exceptionally quiet. A meticulously engineered power supply with dual shielded toroidal transformers and 16 independent power supplies isolates critical circuits so complex music stays clean, layered, and effortless at any volume.
Connectivity is equally uncompromising: connect turntables via a high-performance MM/MC phono stage, run sources through balanced XLR and RCA analog inputs, and enjoy high-resolution digital playback through coax/optical, PC-USB, and Bluetooth with aptX HD and AAC. The P5 Series 2 also supports MQA/MQA Studio, is Roon Tested, includes a front headphone output, and offers serious integration tools like RS232, Ethernet, and 12V triggers - making it as installer-friendly as it is audiophile-focused.
The Michi P5 Series 2 is part of ListenUp's Rotel Premplifiers Collection.
What It's Good At:
- Ultra-resolving DAC performance with dual ESS SABRE ES9028PRO converters in MONO mode for expansive imaging and low noise
- Turntable-ready flexibility with built-in Moving Magnet and Moving Coil phono support
- True high-end connectivity including balanced XLR I/O, multiple analog inputs, and digital inputs for modern sources
- Hi-res computer audio via PC-USB with PCM up to 32-bit/384kHz, plus DSD/DoP and MQA support
- Wireless convenience without compromise using Bluetooth aptX HD + AAC for higher-quality streaming
- System integration and control with Ethernet, RS232, and 12V trigger support for custom installs
Michi P5 Series 2 Full Specifications:
- Total Harmonic Distortion (THD) (20Hzโ20kHz): < 0.002%
- Intermodulation Distortion (60 Hz : 7 kHz, 4:1): < 0.002%
- Input Sensitivity / Impedance โ Phono Input (MM): 2.5 mV / 47k ohms
- Input Sensitivity / Impedance โ Phono Input (MC): 250 uV / 100 ohms
- Input Sensitivity / Impedance โ Line Level Inputs (RCA): 160 mV / 47k ohms
- Input Sensitivity / Impedance โ Line Level Inputs (XLR): 250 mV / 100k ohms
- Input Overload โ Phono Input (MM): 199 mV
- Input Overload โ Phono Input (MC): 22 mV
- Input Overload โ Line Level Inputs (RCA): 12 V
- Input Overload โ Line Level Inputs (XLR): 12 V
- Output Level โ Line Level (RCA): 1 V / 470 ohms
- Output Level โ Line Level (XLR): 2 V / 100 ohms
- Frequency Response (Analog) โ Phono Input: 20 Hz โ 20 kHz (0 ยฑ 0.3 dB)
- Frequency Response (Analog) โ Line Level Inputs: 10 Hz โ 100 kHz (0 ยฑ 0.3 dB)
- Tone Controls โ Bass: ยฑ 10 dB at 100 Hz
- Tone Controls โ Treble: ยฑ 10 dB at 10 kHz
- Signal to Noise Ratio (IHF โAโ weighted) โ Phono Input: 80 dB
- Signal to Noise Ratio (IHF โAโ weighted) โ Line Level Inputs: 116 dB
- Channel Separation โ Phono Input: > 55 dB
- Channel Separation โ Line Level Inputs: > 85 dB
- Digital Section โ Frequency Response: 20 Hz โ 20 kHz (0 ยฑ 0.3 dB Max)
- Digital Section โ Signal to Noise Ratio (IHF โAโ weighted): 100 dB
- Digital Section โ Input Sensitivity/Impedance: 0 dBFs / 75 ohms
- Digital Section โ Digital Output: 0.75V, Peak to Peak
- Digital Section โ Load Impedance: 75 Ohms
- Digital Section โ Coaxial/Optical Digital Signals: SPDIF LPCM (up to 192kHz / 24 bit)
- Digital Section โ PC-USB (USB Audio Class 1.0): up to 96kHz / 24-bit
- Digital Section โ PC-USB (USB Audio Class 2.0): up to 384kHz / 32-bit (driver installation required)
- Digital Section โ DSD and DoP: Supported
- Digital Section โ MQA and MQA Studio: Supported
- Digital Section โ Roon Tested: Yes
- Power Requirements (Europe): 230 Volts, 50 Hz
- Power Requirements (USA): 120 Volts, 60 Hz
- Power Consumption: 40 watts
- Standby Power Consumption (Normal): < 0.5 watts
- Standby Power Consumption (Network Wakeup): < 2 watts
- BTU (4 ohms, 1/8 power): 87 BTU/h
- Dimensions (W x H x D): 485 x 150 x 452 mm (19" x 6" x 17 3/4")
- Front Panel Height: 132 mm / 5 1/4"
- Weight (net): 22.9 kg / 50.5 lb
- Finish: Black
- Connections: MM/MC phono input with ground; 3 pairs RCA line inputs (CD/Tuner/Aux); 2 pairs XLR inputs; 3 digital inputs (coax/optical sets); PC-USB; Bluetooth (AAC, aptX HD); 2 sets RCA preamp outputs; 2 pairs XLR outputs; line output; 2 mono sub outputs; digital output; front 6.3mm headphone output; rear USB power/update port; Ethernet; RS232; EXT REM IN; 12V trigger connections
- DAC Configuration: Dual 8-channel ESS SABRE ES9028PRO in MONO mode
Michi P5 Series 2 Q&A:
- What makes the Michi P5 Series 2 different from a typical preamp?
- It combines a reference-grade analog preamp with a flagship dual-DAC digital section, plus premium power isolation, to deliver exceptionally low noise and high resolution from both analog and digital sources.
- Does the P5 Series 2 work with turntables?
- Yes. It includes a built-in phono stage supporting both Moving Magnet (MM) and Moving Coil (MC) cartridges, plus a ground connection to help reduce hum.
- Can I connect balanced XLR sources and amplifiers?
- Yes. The P5 Series 2 offers two pairs of balanced XLR inputs and two pairs of balanced XLR outputs for fully balanced system builds.
- What digital sources can I connect?
- You can connect coaxial and optical digital sources (up to 24-bit/192kHz) and computers via PC-USB (up to 32-bit/384kHz in USB Audio Class 2.0 mode).
- Does it support Roon and MQA?
- Yes. It is Roon Tested and supports MQA/MQA Studio, with full capability available via PC-USB in USB Audio Class 2.0 mode.
- Can I stream music wirelessly to it?
- Yes. Bluetooth streaming is supported, including AAC and aptX HD for improved wireless audio quality.
- Does it have outputs for subwoofers?
- Yes. It provides two mono subwoofer outputs, making it easy to integrate one or two subs into a high-end 2-channel system.
- Is it suitable for custom installation and automation systems?
- Yes. Ethernet and RS232 connections are included for control system integration, along with 12V trigger connectivity for coordinated power control.
Michi P5 Series 2 Downloads:
Michi P5 Series 2 Manual
Michi P5 Series 2 Specifications Sheet
Michi P5 Series 2 Drawing
