JBL Stage 260F - 2.5-Way Dual 6.5-inch Floorstanding Loudspeaker (Latte) - Clearance / Open Box
JBL Stage 260F - 2.5-Way Dual 6.5-inch Floorstanding Loudspeaker (Latte) - Clearance / Open Box
Stage 260F
Designed and engineered at JBL's world-famous Acoustic Engineering Center of Excellence in Northridge, California, the Stage 260F is the midsize floorstanding loudspeaker of the JBL Stage Series. This floorstanding loudspeaker features a 2.5-way design with Next Generation patented High-Definition Imaging (HDI™) waveguide geometry, 1-inch (25mm) Anodized Aluminum dome tweeter, and dual 6.5-inch (165mm) Polycellulose ribbed cone woofers that provide deep, signature JBL bass.
Features:
-
Dual 6.5-inch (165mm) Polycellulose Ribbed Cone Woofers
- Precision 2.5-Way Crossover
- Next Generation HDI™ Horn
- 1-inch (25mm) Anodized Aluminum Tweeter
- 5-Way Binding Posts
- Magnetically Attached Grilles
- Dedicated ATMOS 5-Way Binding Posts with Integrated Wire Management
- Dual Flared Racetrack Rear-Firing Tuned Ports
- Compatible with 240H ATMOS Height Module
Dual 6.5-inch (165mm) Polycellulose Ribbed Cone Woofers
The 260F features Polycellulose ribbed cone woofers. This pure pulp cone has a proprietary mix of other materials added to improve its rigidity and the ribs echo legendary JBL designs. These woofers produce deep, accurate, room filling bass.
1-inch (25mm) Anodized Aluminum Tweeter in a Next Generation HDI™ Waveguide
Through intense research of previous waveguide designs, JBL has developed a new complex geometry that improves directivity, reduced diffraction, and an overall neutral frequency response both on and off axis. The Stage 2 HDI Horn is coupled to an anodized aluminum dome tweeter to enhance efficiency and dynamics. This new design offers a neutral frequency response both on and off axis.
Compatible with 240H Atmos Module
The 260F mates perfectly with the 240H to add Dolby Atmos to your system for an enhanced listening experience. Dedicated Atmos 5-way binding posts hide the wiring and create a seamless appearance.
General Specifications:
Type: Floorstanding Loudspeaker System
Low Frequency Driver: Dual 6.5-inch (165mm) Polycellulose Ribbed Cone
High Frequency Driver: 1-inch (25mm) Anodized Aluminum
Waveguide: Next Generation HDI™
Recommended Amplifier Power: 20-225W
Frequency Response ± 6dB: 40Hz-25kHz
Sensitivity @ 1M, 2.83V: 90dB
Nominal Impedance: 6 Ohms
Crossover Frequencies: 1.3kHz/1.7Khz
Enclosure Tuning: Bass Reflex via Dual Flared Racetrack Rear-Firing Tuned Ports
Finish: Espresso or Latte
Dimensions:
Dimensions (HxWxD): 40.8in x 12.2in x 14.3in (1036mm x 310mm x 362mm)
Dimensions (HxWxD) without Base: 43.8in x 9.5in x 16.1in (1113mm x 241mm x 409mm)
Product Weight: 43.0 lbs. (19.5 kg)
Shipping Weight: 53.1 lbs. (24.1kg)
Shipping Units of Measure: Each
What's in The Box?
- 1 x 260F
- 1 x Plinth
- 4 x Mounting Screws
- 4 x Floor Spikes
- 1 x Tool
- 1 x Speaker Grille
- 1 x Safety Sheet
- 1 x Quick-Start Guide
Original: $449.00
-65%$449.00
$157.15More Images
JBL Stage 260F - 2.5-Way Dual 6.5-inch Floorstanding Loudspeaker (Latte) - Clearance / Open Box
Stage 260F
Designed and engineered at JBL's world-famous Acoustic Engineering Center of Excellence in Northridge, California, the Stage 260F is the midsize floorstanding loudspeaker of the JBL Stage Series. This floorstanding loudspeaker features a 2.5-way design with Next Generation patented High-Definition Imaging (HDI™) waveguide geometry, 1-inch (25mm) Anodized Aluminum dome tweeter, and dual 6.5-inch (165mm) Polycellulose ribbed cone woofers that provide deep, signature JBL bass.
Features:
-
Dual 6.5-inch (165mm) Polycellulose Ribbed Cone Woofers
- Precision 2.5-Way Crossover
- Next Generation HDI™ Horn
- 1-inch (25mm) Anodized Aluminum Tweeter
- 5-Way Binding Posts
- Magnetically Attached Grilles
- Dedicated ATMOS 5-Way Binding Posts with Integrated Wire Management
- Dual Flared Racetrack Rear-Firing Tuned Ports
- Compatible with 240H ATMOS Height Module
Dual 6.5-inch (165mm) Polycellulose Ribbed Cone Woofers
The 260F features Polycellulose ribbed cone woofers. This pure pulp cone has a proprietary mix of other materials added to improve its rigidity and the ribs echo legendary JBL designs. These woofers produce deep, accurate, room filling bass.
1-inch (25mm) Anodized Aluminum Tweeter in a Next Generation HDI™ Waveguide
Through intense research of previous waveguide designs, JBL has developed a new complex geometry that improves directivity, reduced diffraction, and an overall neutral frequency response both on and off axis. The Stage 2 HDI Horn is coupled to an anodized aluminum dome tweeter to enhance efficiency and dynamics. This new design offers a neutral frequency response both on and off axis.
Compatible with 240H Atmos Module
The 260F mates perfectly with the 240H to add Dolby Atmos to your system for an enhanced listening experience. Dedicated Atmos 5-way binding posts hide the wiring and create a seamless appearance.
General Specifications:
Type: Floorstanding Loudspeaker System
Low Frequency Driver: Dual 6.5-inch (165mm) Polycellulose Ribbed Cone
High Frequency Driver: 1-inch (25mm) Anodized Aluminum
Waveguide: Next Generation HDI™
Recommended Amplifier Power: 20-225W
Frequency Response ± 6dB: 40Hz-25kHz
Sensitivity @ 1M, 2.83V: 90dB
Nominal Impedance: 6 Ohms
Crossover Frequencies: 1.3kHz/1.7Khz
Enclosure Tuning: Bass Reflex via Dual Flared Racetrack Rear-Firing Tuned Ports
Finish: Espresso or Latte
Dimensions:
Dimensions (HxWxD): 40.8in x 12.2in x 14.3in (1036mm x 310mm x 362mm)
Dimensions (HxWxD) without Base: 43.8in x 9.5in x 16.1in (1113mm x 241mm x 409mm)
Product Weight: 43.0 lbs. (19.5 kg)
Shipping Weight: 53.1 lbs. (24.1kg)
Shipping Units of Measure: Each
What's in The Box?
- 1 x 260F
- 1 x Plinth
- 4 x Mounting Screws
- 4 x Floor Spikes
- 1 x Tool
- 1 x Speaker Grille
- 1 x Safety Sheet
- 1 x Quick-Start Guide
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Stage 260F
Designed and engineered at JBL's world-famous Acoustic Engineering Center of Excellence in Northridge, California, the Stage 260F is the midsize floorstanding loudspeaker of the JBL Stage Series. This floorstanding loudspeaker features a 2.5-way design with Next Generation patented High-Definition Imaging (HDI™) waveguide geometry, 1-inch (25mm) Anodized Aluminum dome tweeter, and dual 6.5-inch (165mm) Polycellulose ribbed cone woofers that provide deep, signature JBL bass.
Features:
-
Dual 6.5-inch (165mm) Polycellulose Ribbed Cone Woofers
- Precision 2.5-Way Crossover
- Next Generation HDI™ Horn
- 1-inch (25mm) Anodized Aluminum Tweeter
- 5-Way Binding Posts
- Magnetically Attached Grilles
- Dedicated ATMOS 5-Way Binding Posts with Integrated Wire Management
- Dual Flared Racetrack Rear-Firing Tuned Ports
- Compatible with 240H ATMOS Height Module
Dual 6.5-inch (165mm) Polycellulose Ribbed Cone Woofers
The 260F features Polycellulose ribbed cone woofers. This pure pulp cone has a proprietary mix of other materials added to improve its rigidity and the ribs echo legendary JBL designs. These woofers produce deep, accurate, room filling bass.
1-inch (25mm) Anodized Aluminum Tweeter in a Next Generation HDI™ Waveguide
Through intense research of previous waveguide designs, JBL has developed a new complex geometry that improves directivity, reduced diffraction, and an overall neutral frequency response both on and off axis. The Stage 2 HDI Horn is coupled to an anodized aluminum dome tweeter to enhance efficiency and dynamics. This new design offers a neutral frequency response both on and off axis.
Compatible with 240H Atmos Module
The 260F mates perfectly with the 240H to add Dolby Atmos to your system for an enhanced listening experience. Dedicated Atmos 5-way binding posts hide the wiring and create a seamless appearance.
General Specifications:
Type: Floorstanding Loudspeaker System
Low Frequency Driver: Dual 6.5-inch (165mm) Polycellulose Ribbed Cone
High Frequency Driver: 1-inch (25mm) Anodized Aluminum
Waveguide: Next Generation HDI™
Recommended Amplifier Power: 20-225W
Frequency Response ± 6dB: 40Hz-25kHz
Sensitivity @ 1M, 2.83V: 90dB
Nominal Impedance: 6 Ohms
Crossover Frequencies: 1.3kHz/1.7Khz
Enclosure Tuning: Bass Reflex via Dual Flared Racetrack Rear-Firing Tuned Ports
Finish: Espresso or Latte
Dimensions:
Dimensions (HxWxD): 40.8in x 12.2in x 14.3in (1036mm x 310mm x 362mm)
Dimensions (HxWxD) without Base: 43.8in x 9.5in x 16.1in (1113mm x 241mm x 409mm)
Product Weight: 43.0 lbs. (19.5 kg)
Shipping Weight: 53.1 lbs. (24.1kg)
Shipping Units of Measure: Each
What's in The Box?
- 1 x 260F
- 1 x Plinth
- 4 x Mounting Screws
- 4 x Floor Spikes
- 1 x Tool
- 1 x Speaker Grille
- 1 x Safety Sheet
- 1 x Quick-Start Guide
